Call us on 01582 377 411
Royal Industrial Doors Logo

Common Roller Shutter Problems

Common Roller Shutter Problems

Roller shutters provide businesses with an extra layer of security and protection. These benefits typically last years, and many commercial establishments enjoy business security with next to no issues.

As with any mechanical contraptions, problems can occur. These are usually only minor problems and can be fixed yourself, but we still recommend getting periodic maintenance to keep on top of any burgeoning issues.

Contact us today to find out how we can help if you have any issues with your roller shutters.

If you’ve noticed any problems with your roller shutters, you’ve come to the right place. In this guide we explore the most common roller shutter problems and explain what the causes are.

There is damage, splits, dents and dings on the door

General wear and tear is natural and to be expected of any shutter. If your roller shutter is exposed to the elements and opens and closes regularly, it’s bound to degrade more quickly. General dings and dents shouldn’t be too concerning unless they affect the structural integrity or security of the shutter.

Impact Damage to a Shutter Door

If you’re concerned about shutter damage, contact a professional to diagnose and fix any concerning issues.

Electric shutter is not opening at all

If you have an electric roller shutter that isn’t opening and closing properly, there may be something wrong with the circuitry. It could be as simple as forgetting to switch on the electricity source, or there might be something wrong with the connectors.

Check the power supply and that everything is connected properly. If the issue persists, contact a professional.

The motor has overheated

It’s possible for the motor to get overheated if you are using your door a lot in a short period of time. An overheated motor may prevent the door from functioning correctly. A simple remedy is to switch off the motor and leave it to cool.

If after leaving it for a short period the problem persists, you should contact a professional to diagnose the issue.

Shutter is bumpy when it opens

If your roller shutter isn’t gliding smoothly, there may be some dirt or debris stuck on the tracks.

Old High Speed Door Shutter Mechanism

This can usually be fixed with a simple clean and some WD40, but may require the assistance of a professional if the problem persists.

Shutter is only opening halfway

Typically, when the door only opens halfway it is because of a problem with the proximity sensors. The proximity sensors may be damaged and need replacing. Shut the power off and inspect the sensors for any dirt or signs of damage.

If you need to replace the sensors, contact a reputable supplier or installer.

Roller shutter servicing

If your roller shutter has a serious fault, it could leave your business exposed. Don’t leave it to chance — contact a trusted maintenance provider to ensure your business is completely secure.

Professional servicing and maintenance will cover a range of issues. You can even get spare parts replaced if you need to.

 

Royal Industrial Doors are a leading provider of roller shutters and roller shutter maintenance. For over 25 years, our team have been helping businesses across Luton, Milton Keynes, Stevenage and beyond, to stay fully protected.

We offer a comprehensive maintenance package, ensuring any and every problem is resolved successfully. We’re so dedicated to helping you, that we even provide a 24-7 emergency callout service. If your roller shutter suffers a critical fault and requires an immediate fix, just give us a call.

Contact us today to find out how we can help you. Call us on 01582 377 411 today!

Do you need some help or advice?

Contact our friendly team of professionals to discuss your requirements

Top

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, assist in our marketing efforts, and for personalised advertising.

More Information Accept All Cookies